How To Get A Seized Wheel Bearing Off. If i can, take the 4 pound sledge to it. If that does not loosen it, there are some other techniques you can use to remove a stuck wheel.
How To Remove A Stuck Wheel Bearing And Hub Assembly - 1A Auto from blog.1aauto.com
To remove the inner wheel bearing, you first need to pry the seal out of the back of the hub. You're replacing it, so don't worry about destroying it. Try to get the axle nut back on.
We Then Show How To Drive It Out Of The Knuckle
Kick by using your foot after jacking up the car, remove all. The size is a standard 13mm and the skateboard tool comes with a socket. If that does not loosen it, there are some other techniques you can use to remove a stuck wheel.
Using A Socket Wrench, Remove The Bolts That Hold The Wheel Hub In Place.
Give the spray around 15 minutes, and then try to get the wheel loose again by giving it a slight punch or kick. The first step is to take off the wheel cap and get to the axle nut. Here are the steps to remove a rusted wheel hub bearing assembly:
To Do That You Heat The Hub It Using A Torch Until The Bearing Grease Starts To Drip Out, Then Hammer The Races Out Using The Punch.
Then the bearing should slip off with a little tapping from a hammer, or. Being careful not to heat the axle. Try to get the axle nut back on.
Checking The Wheel Assembly Method 2:
Otherwise if i can't get the castle nut. You need to heat the bearing with a torch to expand the bearing. In some vehicles, you can do this without taking off the lug nuts but in most.
Now You Need The Bearing Puller Tool.
If you don’t have a skateboard tool, use a socket wrench. Let it soak in blaster for a day. To do this follow the following steps:
